rayapp

Made In Space and Braskem launch 3D printing recycling facility aboard the ISS

Californian off-world manufacturerMade In Space(MIS) has partnered withBraskem, a Brazilian petrochemical company, to develop a plastic recycling facility for 3D printed parts to send to the国际空间站(ISS). The facility, named Braskem Recycler, will be launched to the ISS aboardNorthrop Grumman‘s upcoming 12th commercial resupply mission (NG-12) no later than November 2 2019.

The Recycler aims to improve the sustainability of the station’s manufacturing capabilities. It is designed to convert plastic waste and 3D printed objects into feedstock for the additive manufacturing systems currently onboard the ISS. Potentially, this can help create a near-closed loop manufacturing system, and therefore reduce the reliance on feedstock resupply missions from Earth for space exploration.

“Local manufacturing resources are a crucial capability for space exploration,” commented MIS Chief Engineer Michael Snyder.

“Demonstrating and validating recycling capabilities on the ISS is an important step towards developing sustainable manufacturing systems that will enable us to venture deeper into the solar system.”

The Braskem Recycler. Photo via Made In Space.
The Braskem Recycler. Photo via Made In Space.

Pioneering 3D printing in space

MIS aims to deliver next-generation manufacturing in orbit to support exploration objectives and national security priorities. It is focused on industrializing the space environment by developing manufacturing facilities and materials for use beyond Earth.

A large focus of its technology portfolio space has revolved around additive manufacturing, with MIS being the first company to place a 3D printer on the ISS. Known as theAdditive Manufacturing Facility(AMF), MIS’ 3D printer has now produced over 200 tools, assets, and parts in orbit.

Sincelaunching the AMFin 2016, MIS has gone on to other, varied and larger-scale fabrication projects including the satellite-buildingArchinaut system, capable of 3D printing inlow-gravity conditionsforoff-world manufacturing. MIS was awarded with a$73.7 million contract from NASA2019年7月,恶魔trate 3D printing in a Low Earth Orbit (LEO) using the Archinaut One.

In 2018,NASAalso awarded a Small Business Innovation Research (SBIR) contract to MIS for the development of itsVulcan Hybrid Manufacturing System, capable of working more than 30 different materials covering both polymers and metals. Essentially an upgrade of the AMF, the Vulcan will have subtractive manufacturing toolheads in addition to 3D printing capabilities.

The original Made In Space Additive Manufacturing Facility (AMF) now aboard the ISS. Photo via Made In Space
The original Made In Space Additive Manufacturing Facility (AMF) now aboard the ISS. Photo via Made In Space

Recycling in space for circular additive manufacturing

Once MIS and Braskem’s Recycler reaches the ISS, it will be capable of producing recycled feedstock compatible with the AMF. Plastic waste and materials can be loaded into the facility and subsequently reduced into smaller pieces. These parts are then heated, extruded, and spooled to create the required feedstock. The process is mostly automated, with the only manual stage involving material loading. The facility will demonstrate its recycling capabilities with a specific polyethylene, developed by Braskem, called “I’m green” Biobased PE.

“On Earth, we are committed to a joint effort, involving our customers, value chain partners and society at large, to find more sustainable solutions through the use of plastic,” added Braskem CEO, Fernando Musa. “In space, by supporting Made In Space, we have the opportunity to contribute to reducing mission costs and optimizing the transported weight.”

NASA and Tethers Unlimited Inc. Refabricator recycler and 3D printer, due for launch on the ISS 2018. Photo via: NASA/MSFC/Emmett Given
NASA and Tethers Unlimited Inc. Refabricator recycler and 3D printer, Photo via NASA/MSFC/Emmett Given.

As the Recycler can potentially reduce the need for resupply missions, this can create important benefits for future long-duration space exploration by improving reusability and sustainability of manufacturing processes in space. NASA also recently installed an integrated3D printer and plastic recyclerknown as theRefabricatoraboard the ISS, developed by US-based aerospace companyTethers Unlimited Inc.(TUI). The provision of spare parts to maintain the ISS is a significant part of NASA’s in-space manufacturing (ISM) roadmap. It has already explored thepotential of 3D printing in spaceto minimize the cost of spare parts and enable in-situ resource production in the future.

Subscribe to the3D Printing Industry newsletterfor the latest news in additive manufacturing. You can also stay connected by following us onTwitterand liking us onFacebook.

Looking for a career in additive manufacturing? Visit3D Printing Jobsfor a selection of roles in the industry.

Featured image shows the Braskem Recycler. Photo via Made In Space.