雷竞技在线登录

Review: peel 3d, an introduction to professional 3D scanning

Launched October 2017,果皮3D是一个低于$ 6,000手持3D扫描仪powered by Canadian scanning providercreaform和美国全球电子制造商AMETEK.

该设备以具有竞争力的价格标签拥有专业级别的质量,针对客户简单,有效且价格合理的3D对象捕获。因此,果皮3D旨在很好地扫描,而无需粘性或外部靶向点。它还使用白色LED结构光技术,如果暴露在肉眼上,这是安全的。

The peel 3d handheld 3D scanner. Photo by Oscar Milani Gallieni
The peel 3d handheld 3D scanner. Photo by Oscar Milani Gallieni

快速,简单,有效的校准

Peel 3D的第一印象是它是轻巧的,可以促进长时间的扫描,并且其校准快速而简单。

As with other 3D scanners of this price range, the peel 3d is calibrated using a board designed with multiple dots. In this instance, the scanner is place closed to the board and slowly moved away until a notification is received.

在Peel 3D中,此校准过程大约需要一分钟才能完成。与其他范围内的其他扫描仪不同,该过程仅在地面/A桌子上平坦的点板进行一次进行。其他扫描仪通常需要移动和倾斜板才能完成校准。此外,为了使此过程完全自动化,您将以3倍的价格查看3D扫描仪,因此Peel 3D的解决方案是一个受欢迎的功能。

用于后处理3D扫描的软件是also intuitive and simple to pick up.

果皮3Dtest parameters

为了本次审查,使用Peel 3D扫描了六个具有不同表面和复杂性的物体。所有这些都是在办公室环境中进行的,具有足够的高架照明。大多数对象是两次扫描的3D扫描,以找到每个对象的最佳设置。每个测试3D扫描的参数可以在下表中找到。

目的 检测模式 Shutter speed 解析度 Tracking dots
Test 1A Diadumenos Male Torso Uniform surface 自动的 1mm Y
Test 1B Diadumenos Male Torso Uniform surface 8 ms 2mm N
测试2a一个胡子老人的头 Uniform surface 自动的 1mm N
Test 2B Head of a Bearded Old Man Uniform surface 8 ms 2mm N
测试3A MARWARI马头 自动的 自动的 2mm N
测试3B Marwari马头 Uniform surface 8 ms 1mm N
测试4A Costanza Bonarelli的半身像 Uniform surface 自动的 2mm N
Test 4B Bust of Costanza Bonarelli Uniform surface 1 ms 1mm N
Test 5 Living Model Head Scan 自动的 自动的 2mm N
测试6木椅 Uniform surface 自动的 2mm N

基本3D扫描

The first object was a 3D printed replica of theDiadumenos Male Torso雕塑显示在卢浮宫博物馆,巴黎。

Approximately 35cm high with large, smooth features, this model is a fairly simple test.

测试后1A without tracking dots it became apparent that the peel 3d scanner could handle the model without them. This was proved in Test 1B, tried without tracking dots, and still achieving and adequate quality.

在每个测试中捕获完整的物体大约需要2分30秒才能完成。并且两种模型在处理后几乎不需要清洁。

从左开始:DICAMENOS雄性躯干与扫描测试1A和测试1B的3D打印复制品。
从左开始:DICAMENOS雄性躯干与扫描测试1A和测试1B的3D打印复制品。

捕获复杂的文化遗产物体

接下来,我们移至更复杂的物体,具有小而详细的特征,在一种情况下是反射表面。

测试2A和2BHead of a Bearded Old Man尽管在3D扫描后必须重建脖子上的一些难以触及的部分,但被捕获得很好。在这些扫描中捕获了几乎不必要的背景内容。我们的工程师能够通过管理扫描参数而不会损害模型的细节,从而将扫描时间从8分钟减少到2分钟。

From left: 3D printed replica of The Head of a Bearded Man vs scan Test 2A and Test 2B.

测试3A和3B的重点是复制品Marwari Horse Head被喷涂银的雕塑使其具有额外的光泽。对于此样品,Peel 3D的均匀检测模式提供了最佳结果,快门速度为8 ms。测试3BMarwari Horse Head, arguably the better quality of the two tests, was captured in only 4 minutes 20 seconds.

从左开始:Marwari马头雕塑与扫描测试3A和测试3B的3D印刷和银喷涂复制品。
从左开始:Marwari马头雕塑与扫描测试3A和测试3B的3D印刷和银喷涂复制品。

And, in a final test of complexity the team tried a replica 3D prBust of Costanza Bonarelli.Scan该模型的测试4B被证明是两者中质量更好的,尽管它需要27分钟的后处理,而4A的后处理时间为6分20秒。这里的交易是在扫描时间进行的。这两个测试都不花费超过4分钟的时间才能完成,但是随后的数字步骤需要完成模型的高细节。

From left: replica 3D printed Bust of Costanza Bonarelli vs scan Test 4A and Test 4B.
From left: replica 3D printed Bust of Costanza Bonarelli vs scan Test 4A and Test 4B.

3D scanning at scale and for live models

The final test performed in our review examined peel 3d’s ability to capture large objects and living models, as is so commonly done using 3D scanning.

一把全尺寸椅用于调查Peel 3D的工业应用潜力。该物体证明对该设备更具挑战性,薄功能意味着花费了30分钟的扫描时间。

Testing the peel 3d's ability to capture large objects and thin features.
Testing the peel 3d’s ability to capture large objects and thin features.

由于头发之类的精美功能,现场模型的头部扫描也很难完成。为了完成扫描,我们要求我们的志愿者穿引擎盖。脸部的整体形状和关键特征被很好地捕获。

Peel 3D兑现其承诺

In summary, with quick calibration, easy to use software and rapid capture times, the peel 3d is a very user-friendly device. It gives reasonable results in a short time, even with small complex objects, and the automatic parameters are powerful.

作为具有此价格范围的许多手持式3D扫描仪的警告,有时对象的跟踪确实会丢失。但是,Peel 3D可以在发生这种情况时很容易恢复扫描。

果皮3D提供了应许的东西对于初学者或制造商来说,寻找价格合理的3D扫描的理想选择。

对于所有最新的3D打印新闻和评论订阅雷竞技在线登录3D打印行业newsletter, 跟着我们Twitter和我们一样Facebook.

Seeking jobs in engineering? Make your profile on3D Printing Jobs, or广告在您所在地区找到专家。

特色图显示了Peel 3D手持式3D扫描仪。照片由奥斯卡·米兰尼·加里尼尼(Oscar Milani Gallieni)