Adira, a Portuguese producer of industrial manufacturing machines, is testing a prototype of a new SLM 3D printer for building large and high-density metal parts.
The project titled SLM-XL is conducted in collaboration withUniversidade Nova de Lisboa’s engineering and technology schoolInstituto Superior Técnico(TECNICO LISBOA) andManuel Conceição Graça(MCG), a Portuguese engineering firm.
SLM-XL is funded by theEuropean Regional Development Fund(FEDER) throughPOR Lisboa 2020andPrograma Operacional Factores de Competitividade(COMPETE). The SLM-XL project will also see the finalization of Adira’s prototype machine.
Additive manufacturing with Tiled Laser Melting
Founded in 1956, Adira manufactures industrial manufacturing machines, such as press brakes, laser cutters, and shears. In addition to this, Adira also provides software solutions like Adbendpro, a 3D modeling software, and Cidcut, a CAM programmer for laser cutting machines.
In 2017, the Portuguese manufacturer also introduced a metal 3D printer, theAddCreator, which uses Adira’s proprietary technology known as Tiled Laser Melting (TLM). An innovative aspect of this system is its movable build chamber which moves to a new location after printing a ’tiled segment’ of the component. This allows the machine to build large metal parts.
SLM-XL project
In SLM-XL two issues in powder bed fusion (PBF) 3D printing were addressed: low density of the 3D printed parts, and limitations of the build size.
Porosity and keyhole formation are two factors which contribute to density problems.Understanding of these issues in metal 3D printingis still limited.Densityproblems can be solved by treating the metal printed part with ahot isostatic pressure (HIP) machine. But this is a time-consuming extra step and has significant costs.
在SLM-XL程序中,成像和扫描技术ques were used to study the correlation between the density of a part and process parameters of the machine. It was concluded thatto ensure more than 99% density of a part as large as 1 m³ in volume, parameters of the machine need to be adjusted as printing reaches the outer bounds of the component.
In the recent consortium, a prototype of Adira’s new SLM machine was tested using 316 L stainless steel, a commonly used metal alloy. The research also proposed a method to adjust the machine parameters.
2019 3D Printing Industry Awardsare almost here. Vote now for the2019 Enterprise Metal 3D Printer of the Year.
For more information about metal manufacturing, subscribe to our3D printing newsletterand also join us onFacebookandTwitter.
Looking for a new career? Visit our3D Printing Jobspage to receive job updates.
Featured image shows a prototype of the Adira SLM machine. Image via Adira.
