Solid-state metal 3D printing specialistFabrisonichas leveraged Powder Bed Fusion (PBF) to create fine organic patterns that can be embedded into large structures through its patented Ultrasonic Additive Manufacturing (UAM) process.
Combining the strengths of these two processes enabled Fabrisonic to create the exact solution needed by a particular customer, who required a part with organic stainless steel geometry, dissimilar metal transition, and embedded sensors that are fully encapsulated in the metal.
Fabrisonic’s UAM technology
Fabrisonic’s UAM additive manufacturing technique is a混合金属3D打印过程that constructs objects through ultrasonically welding dissimilar metals together via sound vibrations. The technology operates at a low temperature to enable dissimilar materials such as electronics to be embedded into metal alloy structures.
Fabrisonic申请了其UAM 3D打印方法in 2017, and later released itsSonicLayer 1200 machinewhich incorporated the technology. Since then, Fabrisonic has partnered withEWI和Luna Innovationsto build a激光粉床融合（LPBF）的智能底板雷电竞充值增材制造过程。底板用嵌入式传感器打印3D，以正确测量通过它的负载。
At the tail end of 2019, the firm again collaborated with Luna Innovations for a 3D printed sensor project forNASA. Through its UAM technology, Fabrisonic was able to3D print sensors directly into the wallof an existing NASA cryogenic fuel pipe.
The company’s most recent development involved working as part of aNASA SBIRstudy to successfullymerge different amorphous alloys into multi-metal claddingthrough UAM. The method was able to join the metals to crystalline substrates without destroying their beneficial properties, making them well-suited for future potential cladding applications in the aerospace sector.
Combining UAM and PBF
PBF involves depositing a layer of metal powder over a build plate, upon which a laser melts a cross-section out of the powder before new powder is deposited, and the process repeated.
While UAM is well suited to printing large components with multiple metals, embedded sensors, and internal structures, it is not the best choice for creating fine, organic structures. This is where PBF comes in. Fabrisonic utilized PBF to create delicate organic patterns which it could then embed into large structures through UAM.
To create the base structure for the PBF process, Fabrisonic partnered with EWI, with the PBF components arriving at the company as rough blanks. These were then placed in a fixture to constrain the part for welding, so that the vibrations caused by the UAM process wouldn’t move the part out of position. The top of the part was then milled to a flat, even surface.
Aluminum and copper sheet layers were printed one-by-one onto the top surface, the point at which the combining of dissimilar metals took place. The part was then milled to create a pocket for the custom sensor, in which it was placed before UAM was employed to add additional layers of copper and aluminum. This ensures the sensor is protected by a hermetic seal formed by the additional layers bonding to the surrounding metal. In addition to prolonging the life of the sensor, the seal also improves the accuracy of the sensor’s readings.
根据Fabrisonic的说法，其工程师和设计师期待着将来的机会，将其他形式的添加剂制造的好处与其UAM方法的好处相结合。雷电竞充值
Caption: Layers of aluminum and copper sheet were then printed layer-by-layer onto the top surface. Image via Fabrisonic.
Subscribe to the3D Printing Industry newsletterfor the latest news in additive manufacturing. You can also stay connected by following us onTwitter和liking us onFacebook.
Be sure to subscribe to the Another Dimension podcast on your chosen podcast player to make sure you never miss an episode.
Looking for a career in additive manufacturing? Visit3D Printing Jobsfor a selection of roles in the industry.
Featured image shows finished part made through combining Ultrasonic Additive Manufacturing and Powder Bed Fusion. Image via Fabrisonic.
