Argonne National Laboratory, Illinois, has ramped up its additive manufacturing research with the addition of an infrared camera. Capable of capturing thermal signatures of melted particles at 100,000 frames per second (fps), the new addition is doubling down the lab’s efforts to enhance the reproducibility of powder bed fusion (PBF) processes.
Particle analysis
At Argonne, meltpool metrology research is conducted by the lab’s Advanced Photon Source – asynchrotron-radiation light sourcecapable of high energy, and high speed x-rays.
采用x射线粉末床,三英洁具tists are able to analyze the behavior of particles at up to 1,000,000 fps, then modify the process to make allowances for phenomena such as thespatter effect. Some of the lab’s most recentfindings from high speed x-rayswere published inScientific Reportsin June 2017.
X-ray and infrared – a perfect balance
Now with the thermal signatures of this behavior, the Advanced Photon Source provides another data point for enhanced analysis. Argonne physicist Tao Sun explains:
“Infrared and X-ray imaging complement each other,”
”From one side you have the X-rays penetrating the sample to help you see the microstructures without any thermal information, while on the other you have the infrared camera capturing many thermal signatures associated.”
Plumes of vaporized powder are just one example of what can be seen by the infrared camera, but not by x-ray alone
Defect detection
The real-world application of this level of metrology is, for example, in flaw detection. If correlations between the meltpool and defects can be found, then the process can be augmented to automatically detect those variables, as in ongoingsurface metrology researchat theNational Institute of Standards and Technology(NIST).
Sun concludes, “Not everyone is lucky enough to have access to a powerful X-ray light source like the Advanced Photon Source, so if we can find ways to deliver information and tap into tools that most people have access to, like thermal cameras, we can have an even greater impact on the field.”
Subscribe to the3D Printing Industry newsletter, follow us onTwitterand like us onFacebookfor all the latest additive manufacturing research updates. Seeking a new development opportunity? Join3D Printing Jobsnow oradvertise a vacancyto reach our specialized readership.
Featured image shows X-ray imaging of the powder bed. Image via Tao Sun/Argonne National Laboratory
