Travis Air Force Base(AFB) in Fairfield, California has recruited the help of 3D printing technologies. The Air Base has employed 3D scanners to reduce maintenance time. Moreover, 3D printers are in use at Travis AFB’sDavid Grant USAF Medical Center(DGMC), to make dental models and surgical guides.
Col. Matthew Leard, vice commander, 60th Air Mobility Wing, said, “At Travis (AFB), Airmen are empowered to identify and solve problems at their level, rapidly.”
Advancing additive manufacturing
TheU.S Air Forcehassuccessfully utilized 3D printingin many cases. TheAir Force Research Laboratory(AFRL) is especially active furthering research intoadvanced manufacturing methods.MAMLS, one of AFRL’s largest project for sustainable rapid part replacement employs 3D printing technology. Most recently, theAFRL awarded $5 million in grantsto accelerate the development of additive manufacturing.
Furthermore, as previously reported, Travis AFB has utilized 3D printers toreplace handles of military-grade thermoses. And since receiving part of the $64 million Squadron Innovation Funds, a grant to kickstart Air Force tech projects, the Travis AFB has expanded its wings.
3D scanning aircrafts
The Travis AFB procured aCreaFormHandyScan 700, a handheld 3D scanner. The 3D scanner is now part of Travis AFB’s maintenance operation, successfully used to inspect aircraft damage.
Master Sgt. Christopher Smithling, assistant section chief for aircraft structural maintenance, 60th Maintenance Squadron, said, “The scanner displays the deepest part of a dent to the nearest thousandth of an inch […] The scanner can identify the shape of a dent, as well as if it’s sharp, smooth or round, which allows us to give our engineers a better damage analysis than we could before.”
中士Smithling,进一步解释道,“我们的一个c - 5aircraft went through a hail storm in 2013 and we found many dents on all the panels […] We’ve performed an inspection of this aircraft every 180 days and we’ve had to measure every dent that’s still on the wing’s surface. The first few times we did that, it took us 48 hours. We had that C-5 in our hangar last week and we were able to inspect the four primary structural panels in 30 minutes.”
Bringing 3D printers on board
Furthermore, efforts are also underway to incorporate metal and polymer 3D printers into the maintenance operation.
Smithling said, “With the two additive manufacturing units, we will be able to grab any aircraft part, scan it, and within four to eight hours, we will have a true 3D drawing of it that we can send to the additive manufacturing unit to print it.”
Having 3D printers on the base will ensure rapid replacement of aircraft parts. “Once we have this additive manufacturing capability in place, we will likely be able to print and replace parts in a few hours and return our aircraft to flying status much quicker,” added Smithling.
Improved dental care with Form 2
Furthermore, aForm 2SLA printer, is tasked with helping dentists at the Dental Clinic of DGMC, the largest medical center of the U.S Airforce.
Capt. Geoffrey Johnston, 60th Dental Squadron prosthodontist, said, “We currently fabricate surgical guides, hard night guards and dental models or casts with different variations […] We are also investigating printing temporary crown and bridge restorations, complete and partial dentures and orthodontic clear aligners.”
The Form 2 has reduced labor hours by 85% and cut production time from three hours to thirty minutes. Furthermore, 3D printing technology has improved the standards of health care in general at the Dental Clinic.
Johnston continued, “By merging 3D radiographs of jaws with 3D models of actual teeth, we are able to plan exact placement of implants and with 3D printing technology added to that, we are able to carry out those plans with extreme precision.”
Nominations are open for3D Printing Awards 2019. Please name your choices.
For more news on additive manufacturing, subscribe to our3D printing newsletter. You can also follow us onFacebookandTwitter.
If you are looking for a job in the industry, visit our3D Printing Jobspage.
Featured image shows the Travis Air Force Base, Fairfield, California. Photo via the U.S. Air Force/Heide Couch
