Engineered materials company统一实验室已经引入了它UniFuse AlSi10Mg铝制粉末以及在50UM和90UM层厚度的激光粉床融合（LPBF）的增强参数。
This comes on the heels of the previously announced UniFuse AlSi10Mg release and advanced parameters for 30um layer thickness printing. UniFuse AlSi10Mg powder and processing variables are optimized at every layer thickness for the “finest”材料characteristics and repeatability while printing at the highest throughput throughout LPBF platforms.
“With UniFuse AlSi10Mg we’re able to deliver best-in-class mechanical properties, surface finish, printing yield, and part reliability with substantially increased throughput printing at 50um and 90um layer thickness, and when using higher power lasers,” said Uniformity founder and CEO Adam Hopkins.
Features of UniFuse AISi10Mg powder
UniFuse AlSi10Mg at 50um and 90um layer thicknesses in systems with lasers having maximum power ranging from 400W to 700W. Uniformity materials and High-Performance Scanning offer superior characteristics at a build rate that is estimated 75% faster than competitors’ same-layer thickness scan techniques. This increase in throughput is typical of UniFuse AlSi10Mg builds, says the company.
均匀性粉末在整个构建床中提供了增强的机械特性和一致的质量，即使在具有高激光功率的密集层上印刷，这要归功于较高的床，TAP密度和粒度分布，可在最高通量的最高吞吐量下进行一致的重复打印。
霍普金斯补充说：“这对于推进AM作为工业制造的可行支柱非常重要，并表明我们的技术和流程是基于没有妥协添加剂制造的承诺。”雷电竞充值
With the development and manufacturing of its highly sophisticated ultra-low porosity metal powder feedstock, Uniformity Labs is addressing the sector challenge of achieving serial production in additive manufacturing. Uniformity Labs’ High-Performance Scanning strategies, which are currently being produced under the merchandise UniFuse (for LPBF) and UniJet (for binder jetting), have significantly improved the capability to produce high-quality components repetitively and at scale, enabling additive manufacturing to become a progressively well-established serial production tool.
Companies with metal powder production portfolio
Recently, sustainable, low-cost titanium developeriperionx，赢得了NSIN赞助的金属废料和废物粉的NSIN赞助的AFRL Grand Challenge回收的第一阶段（AFRL Grand Challenge＃4）。这项挑战需要在接下来的九个月内授予四个开发周期的500,000美元合同，以开发将废品钛转变为适合添加剂制造的粉末的工艺和设备。雷电竞充值Iperionx团队提出了一种新颖的方法来浪费回收利用，并脱氧钛粉to make it usable.
以前，瑞典3D打印机制造商数字金属launched certifiedmetal powderH13，也称为DM H13. As an abrasion-resistant metal, H13 is commonly used in forming tools such as extrusion dies and injection molds. The inclusion of H13 in the Digital Metal material library will raise the number of mission-critical applications that can be repaired on-demand right where components are required.
“谢谢精度,所以他们的racy of the Digital Metal system, highly complex and detailed H13 parts can be printed, with properties that can be tailored toward application-specific requirements through post-sintering heat treatments,” said Alexander Sakratidis, Director of Sales & Marketing, Digital Metal AB.
什么does the3D打印的未来for the next ten years hold?
什么engineering challengeswill need to be tackled in the additive manufacturing sector in the coming decade?
要了解最新的3D印刷新闻，请不要忘记订阅3D打印行业newsletter或跟随我们推特，或者喜欢我们的页面Facebook.
While you’re here, why not subscribe to ourYouTube渠道？包括讨论，汇报，视频短裤和网络研讨会重播。
Are you looking for a job in the additive manufacturing industry? Visit3D Printing Jobsfor a selection of roles in the industry.
Feature image shows 3D printed cam tray with UniFuse AlSi10Mg. Image via Uniformity Labs.
